• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

The door handles in your home are an important element of your decor. A new handle will bring your home's decor modern.

Over time the knobs on your door may become stiff or even break. These are indications that it's time to replace them. This guide will help you select the appropriate replacement door handle for your home.

aluminium door handles Knobs

The handles on your doors will improve the appearance of your house and make it easier for you to shut and open them. They are available in a wide variety of finishes, colors and types to match your decor. If yours has begun to show signs or need an upgrade it is possible to replace them in a few simple steps.

The first thing you need to find is the shaft or spindle through which the knob is attached to the door. Some have a tiny hole that you can insert a narrow screwdriver into to remove the set screws that hold the knob in place. Some have a tiny slot or hole that you can press a spring-activated detent pin with flathead. When you press the pin it opens the latch mechanism and lets you pull or push on the knob.

Once you have the spindle or shaft, in your hand, remove the old upvc window locking handles handles, pattern-wiki.win, knob and replace it. Align it correctly and check that the latch functions properly before tightening the new set screws.

After replacing the knob, put the rod for the latch into the door's hole. Interlock it with the rod system on the second knob. Make sure that the holes are aligned and then thread in the screws for the latch plate and tighten them.

Some homeowners opt for a brushed or smooth metal finish for their door hardware to give their home a modern and sleek appearance. It will complement the furniture they have. Some people prefer a rustic design that works well with farmhouse-style rooms. If you have someone in your family who has mobility issues, you might prefer the lever or rim lock, which requires less pressure to operate.

Other factors are being looked at more and more when it comes to the design of door handles. Accessibility and control of infections are key considerations when it comes to developing new handle designs. For instance certain handles can be operated using the arm of a person.

Latch

The latch that holds the door handle open can wear down over time. The replacement of the latch to fit a new handle can be a simple DIY job and can make a big difference in how your door opens and closes.

Depending on the kind of handle you choose the latch may be a separate piece or a component of the knob. In either case, the same process for removing and installing is applicable. It's easy to remove the old aluminium window handles latch, particularly in the case of a door handle with a "magic" button. This tiny pressure-slot, found on the side knob is what you will have to press to remove the latch of the handle.

If your handle doesn't come with this button, you'll have to take off the cover plates placed over the latch plate. These are usually circular or rectangular and can be removed using a screwdriver to pry them off the handle. Some have a small slot in them where you can put your screwdriver into, while others snap off.

Then, unscrew the machine screws that attach the inner plate and latch to the door handle. These are the shorter screws with a sharp tip - you will be required to keep them in a safe location to reuse them in subsequent steps. After the screws have been removed, you can remove the latch plate and the mechanism from the hole and set it aside.

Now you can begin installing the new latch. Place the inside of the latch into the hole in the victorian door handle and secure it with the hardware provided. Make sure the square pin that is on the interior of the latch is facing the latching mechanism inside the handle and that it lines up with the other screw chambers inside the door handle. Then attach the latch's exterior plate using the screws provided.

Strike Plate

One of the most frequent reasons to replace the door handle is that it is loose or isn't locking properly. This is typically caused by misaligned parts in the latching mechanism, such as the strike plate being too short or has moved up or down on the doorjamb as time passes. This easy project allows you to replace your existing strike plate with a longer, new one that will provide better security and keep your door closed.

Apply a lipstick or other marking material on the latch bolt to check if it is the strike plate. Close the door and attempt to latch it. If the mark is located below the strike plate hole, this indicates that your door won't latch due to the fact that the plate is too short. If the mark is above the strike hole on the plate, it's likely that the strike plate has been moved up or down on the doorjamb.

It is possible to install the new strikeplate in the old one by using the screws supplied with it, based on the door. You may need to first drill holes and then chisel some wood out to ensure a tight fit. If this is the case, be cautious not to chisel too deeply or you could ruin the integrity of your doorjamb.

You could also try installing a new strike plate which provides the lock with a more secure grip on the door and requires more force to open it. It usually requires two larger screws to secure the strike plate into the frame of the door. You'll have to remove the old strike plate and then drill and chisel the wood to make space for the new one.

This hard-to find strike plate is made of solid brass and comes with a heavy-duty thickness. It's made to be used on antique rim locks. This kit includes both wood screws and machine screws so you can pick the right hardware to suit your requirements. Remember that wood screws have a pointed point, whereas machine screws are blunter.